Dualsky XC8018BA V2 Brushless ESC

Click On Images to Enlarge

Overview

Dualsky XC8018BA Brushless ESC ideally suitable for use with their GA Series X-Motors.

Supports all motor types up to 210,000 rpm(2 Poles motors).
Extremely low resistance, factory high quality MosFETs, for high current usage.
Dualsky Governor Mode(DGM) ready.(40-90A)
Adjustable cut-off, either motor stop or reduction in power.
DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by transmitter when switch on.
Full protection features including: Low voltage cut-off, Over heating protection, signal loss auto cut-off.
Normal, Soft or Super-Soft start up modes available, for both fixed wing and helicopter setups.
Smooth and accurate throttle control throughout the range.
Throttle digital signal sampling, compatible with the signal frequency of 14 msNormalmode and 7 ms high-speed mode (HS Mode).
Throttle range can be re-calibrated, so suitable for all brands of transmitter.
Fully PC programmable when used with Dualsky USB link(#45525).
Compatible with programming card(#45200) for easy re-programming at the field!
6A-30A: Stable linear BEC power supply, support up to 3S Lipo.
40A-80A: UBEC switching power supply, support up to 6S Lipo,3A, easily support 4-5pcs of standard Digital Servos.
100-130A: Control signal applied OPTO technology, eliminate the interference from high voltage to the control system.

Dimensions: (L x W x D)	75 x 30x 14mm
Weight:	71g
Number of Cells:	NiXX 6-18, 7.2-21.6V \| LiPo 2-6, 7.4-22.2V
Resisitance (Ri)(Ohm):	0.0016
Max Cont. Current(A) & Max Cont. Output(W):	80A, 1680W
Max Burst Current(A) & Max Burst Output(W):	100A, 2040W
BEC/Dissipative Power:	5.5V/3A (Switching)
Programmable:	Throttle + ProgCARD + USB Link
Input Wires:	150mm, 12AWG, DC3
Output Wires:	90mm, 14AWG, DB4
Signal Wire:	300mm JR
Description:	High Amp, UBEC
Applications:	.70 Class Aerobatic

Order Code: DUA035
Manufactured By Dualsky

No info at this time...