MG5921HV 20.3Kg.cm/0.12s High Voltage Servo
Buy On Hobbyplastic.co.uk
Find Your Local MacGregor Stockist
Click On Images to Enlarge
Overview
Features
- High Performance High Voltage Coreless Digital Servo
- High Torque and High Speed
- High-Precision Metal Gears With Hard Anodising
- Dual Bearing Support
- Metal Centre Case to act as a Heat Sink
- JR Style Lead and Plug
- 25 Tooth Spline (Futaba Style)
- Waterproof
Description
The MG5921HV is part of MacGregor's range of high voltage digital servos. This high voltage, high torque servo has been designed for use with large scale & aerobatic aircraft.
MacGregor's HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe receiver battery pack. This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (8.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.
Specifications
| Dead band: | 1µs |
|---|---|
| Working frequency: | 1520µs / 330hz |
| Motor: | Coreless Motor |
| Operating Speed (6.0V): | 0.152sec/60° |
| Operating Speed (8.4V): | 0.123sec/60° |
| Stall Torque (6.0V): | 17.25 kg.cm (239.55oz/in) |
| Stall Torque (8.4V): | 20.32 kg.cm (281.89 oz/in) |
| Dimensions: | 40.5 x 20.5 x 36.5mm /1.59 x 0.80 x 1.43in |
| Weight: | 59.3g (2.09oz) |
| Connector Wire Length: | 265mm (10.43in) |
| Bearing: | 2BB |
Related Products
Order Code: MAC5921HV
Manuals/Downloads